Jet RDJ 310-M User Manual page 23

planer fence can also be fully slid to the drill head so that the shaft is completely covered with the
protective plate which is located at the back of the planer fence.
Fig. 28
Installing the planer shaft during drilling (Fig. 29)
Make sure that the threads of the drill head and the threads of the planer shaft are perfectly
clean before installing them.
Fig. 29
Caution: the mortising head has a left-hand thread M24 x 1.5!
Screw the drill head completely onto the planer spindle, then position the 2 pressure screws (fig. 29.1) using
the Allen key supplied with the machine. These pressure screws must be well positioned in the spindle
groove to prevent the drill head (fig. 29.2) from accidentally coming off.
23