Maintenance - Jet RDJ 310-M User Manual

Maintenance

General maintenance
The planing and thicknessing tables should be cleaned regularly with a silicone-based product.
At regular intervals, blow out the dust that accumulates between the cooling fins of the motor. To do this,
simply remove the plate under the electrical control panel to access the motor.
Maintenance of the drive system (Fig. 30-31)
In the case of frequent use, it may be necessary to adjust the tension of the drive belts. The tension of the
2 drive belts of the planer motor can be adjusted by loosening the 4 motor fixing screws. The weight of the
motor is lowered and the belts are tightened.
Fig 30
Fig. 31
24