Transport And Commissioning - Jet RDJ 310-M User Manual

Transport and commissioning

Depending on the mode of transport or shipping method, the machine will be delivered either in a box
or on transport blocks. The panel packaging and wooden beams can be recycled. Remove the sides
of the box as well as the paperboard and other items attached to the bottom of the box.
Use the NX0122 accessory (Fig. 1.1) when using a pallet truck.
Fig 1
DO NOT lift the machine from the pallet using the lifting straps. Otherwise, THE ALIGNMENT OF
THE TABLES WILL BE LOST.
Fig 2A
CAUTION:
If you have no choice but to use a lifting block (hoist), make sure it has sufficient load capacity, and
position the lifting straps so that there is no too much pressure applied on the tables. Raise the
machine a few centimetres to remove the bottom of the box.
COMMISSIONING
After unpacking, check if the machine was damaged during transport or unloading. Place the machine
in a stable position on a solid surface and ensure that there is enough space around the machine to
work safely.
13
Fig 2B