Jet RDJ 310-M User Manual page 15

Comments:
- Protection against short circuits of the electrical circuit parts is provided by fuses positioned between
the main switch of the machine and the different current paths (see diagrams and parts list).
- Motors are protected against overload. If the motor is stopped by this protection, you must wait until
the machine has cooled down completely before proceeding to a restart.
- Always check the direction of rotation of the shaft before each use of the machine, especially when:
o
The machine is moved and reconnected to the mains cable.
o
The power cord has been removed from the machine and reconnected.
o
The power cable has been removed from the electrical cabinet.
Fig 5
Fig. 7
1 Main switch
2 Start button
3 Stop button
4 Emergency stop
15
Fig 8