Email Transmission Requiring Email Authentication - Hioki 8420-51 Instruction Manual

70
1.8 Sending Mail
1.8.5 Email Transmission Requiring Email Authentica-
tion
(Comm Window 5/5)
To send an email, you must access an SMTP server. However,
SMTP servers do not carry out authentication. To prevent abuse,
some Internet service providers use a security measure called
"POP before SMTP" for which you must undergo mail authentica-
tion at the mail-receiving server (POP server) prior to sending an
mail from the SMTP server. When POP before SMTP is used, set
up mail authentication (POP) as shown below.
1. Choose ON in mail authentication (POP).
2. Specify the server name (POP) or IP address (POP) as below.
Comm Window (10BASE-T 5/5, PPP 5/5)
Server name : Specify the receiving server (POP server) using
the host name. (DNS is necessary.)
(IP address : Specify the receiving server (POP server) using
the IP.)
Account name : Mail account name of the receiving server (POP
server)
Password : Mail password of the receiving server (POP
server)