Ftp Data Transfer By Ppp (Rs-232C + Modem) - Hioki 8420-51 Instruction Manual

50
1.7 Automatic Data Transfer by FTP Client

1.7.2 FTP Data Transfer by PPP (RS-232C + Modem)

1. Set the parameters for the PPP on the instrument.
2. Set parameters for communications on the instrument.
3. Configure the modem on the PC.
4. Set up the remote access server on the PC.
5. Set up the FTP server on the PC.
6. Carry out FTP automatic transmission on the instrument.
7. Set the parameters for automatic saving.
8. hen measurement is started on the instrument and a file is auto-
(In addition to public switched networks and cellular phones can be
used.)
Memory
RS-232C
HiLogger
9721 RS-232C CABLE (straight)
+Straight cable included with modem
❖
See Section 1.4.1 and Section 1.4.2.
❖
See Section 1.7.2.
❖
See the Instruction Manual of your modem.
❖
See Section 1.10.8 to Section 1.10.13.
❖
See Section 1.7.5 to Section 1.7.6.
❖
See Section 1.7.3 and Section 1.7.4.
❖
Instruction Manual See Section 7.5 "Automatic Data Saving" (133 page.)
matically saved onto the PC card, the file is automatically trans-
mitted to the FTP server on the PC.
Public switched
network modem
Modem
+
USB, RS-232C,
or PC card
Modem
PC
FTP server