Automatic Data Transfer By Ftp Client - Hioki 8420-51 Instruction Manual

1.7 Automatic Data Transfer by FTP Client

The binary files automatically and periodically saved to a PC card
during measurement, or automatically saved after measurement
can be automatically sent from this instrument to an FTP server
within the network or on a remote PC.
(For automatic saving, select "Binary" (real-time). To save and
send files periodically, select "Divide" or "Regularly" for save mode.
To continuously save and send files even after the PC card is full,
also select "Remove".)
❖
Instruction Manual See Section 7.5 "Automatic Data Saving" (133 page.)
(For FTP servers, Windows FTP servers may be used. Set and
register this instrument by user name and password in those FTP
servers before use. For details, refer to HELP for Windows FTP
servers.)
The free War FTP Daemon Software can be used instead of the
windows FTP Server.
Before automatic data transfer by an FTP client can be performed,
the IP address of the PC on which the FTP server operates must
be specified.
1.7 Automatic Data Transfer by FTP Client
47
1
2
3
4
5
6
7
8
9
10
11