Table of Contents
Advertisement
1.2.2 RS-232 Settings
Remote control is provided by commands sent from the controlling
PC. RS-232C settings are made on the instrument. These settings
must match those on the PC to enable communications.
Display the Status Screen.
Move the blinking cursor to the position shown.
Display the Copy&Comm Screen.
Display the Comm Window.
Move the blinking cursor to the position shown.
Select "
Select each settings.
• If overrun or framing errors occur, reduce the communications
• Do not attempt change settings while communications are
" for the Communications Interface.
RS-232C
Items
Baud Rate
Data Bits
Parity
Stop Bits
Delimiter
Header
Flow Control
speed.
underway.
1.2 RS-232C Communications
Settings
1200 to 19200 bps
7 bit/ 8 bit
None/ Even/ Odd
1 bit/ 2 bit
LF/ CR+LF
OFF/ ON
None/ X-on/X-off/ Hardware
7
1
2
3
4
5
6
7
8
9
10
11
Advertisement
Table of Contents
