Table of Contents
Advertisement
36
1.5 Remote Measurement Using HTTP Server
1.5.3 Main Page
To display the main page, launch Internet Explorer and enter the
instrument address in the address column as http://192.168.1.2.
Click [
(When connected in PPP via a modem, the address will be like
http://192.168.55.2.) When FTP/HTTP authentication on the instru-
ment communication interface screen is turned on, you will be
prompted for the user name and password. Enter both, then press
the [
(To ensure that HTTP will not be inadvertently accessed by any
third party, we recommend limiting connections by user name and
password on the instrument communication interface screen.)
• If the HTTP screen does not appear, choose [
• If the HTTP screen appears but the remote control screen
• If all of the HTTP screen does not appear, see the 1.3.4 "Com-
• Internet Explorer version 4 or later is supported.
During measurement with the 9334 LOGGER COMMUNICATOR
or using a program created in Visual Basic, for example, remote
operation by a HTTP server is not possible.
SETTING PAGE
] button.
SET
] on the Internet Explorer tool bar and click on the
Options
[
] tab. Check the box for [
Advanced
the check from the box for [
.] if it is checked. Also, choose the [
nections
of [
Internet Options
remove the check from the box for [
checked.
does not, choose [
Explorer tool bar and click on the [
] and click on the [
net
[
Java permissions
Java. If Java is not installed, reinstall Internet Explorer with
Java included.
munication Problems" (page 18.)
Netscape Navigator can also be used, but in such case, part of
the browser screen may be unable to operate normally.
.]
Use HTTP1.1
Use HTTP1.1 through proxy con-
], click on the [
LAN Settings
Use a proxy server
] > [
Tools
Internet Options
Security
Customize Level
] and choose a permission level to enable
] > [
Tools
Internet
] and remove
Connections
] button, and
] if it is
] on the Internet
] tab. Choose [
] button. Scroll down to
] tab
Inter-
Advertisement
Table of Contents
