Table of Contents
Advertisement
46
1.6 Downloading Data to a PC via FTP Server
1.6.4 FTP Authentication
FTP authentication of this instrument is set to "Anonymous." Any
device on the network is allowed to access the FTP server.
If you want to restrict access to the FTP server, set FTP/HTTP
authentication to ON and enter the username and password.
We recommend that connection be restricted through the use of a
username and password, to prevent an unauthorized person from
accidentally accessing and deleting the files.
• The FTP server of the instrument allows only one connection
• If no command is sent from a PC for more than one minute
• If connection cannot be reestablished, wait about one minute,
• The FTP client can only read files during real-time save, auto-
• If data is being written to the PC card using the FTP at the start
• If the instrument ends measurement during data transmission
• Be sure to disconnect the PC from the FTP before replacing
• Although the PC card on this instrument can be accessed from
• With Internet Explorer, the refresh date of files may not match
• With Internet Explorer, temporary internet files may retain data
at a time. More than one PC cannot access the server simulta-
neously.
after connecting to the FTP server, the FTP may disconnect
the PC. Reconnect the FTP.
then try again.
matic save, manual save, file delete, directory create/delete,
name edit, or format operations.
of automatic saving or calculation-data saving, FTP operation
will be interrupted to save data.
using the FTP, transmission may be interrupted to save data.
the PC card.
outside using FTP, do not access the card from FTP or the
main instrument, or simultaneously manipulate files from tel-
net, etc. Such operation may lead to unexpected results.
those of the main instrument.
from their previous access, so the previous data may be
obtained instead of the newest data. If the instrument data has
been updated, reload Internet Explorer and then access it via
FTP.
Advertisement
Table of Contents
