Operating Instructions; Operating Temperature; Manual Operation - Vivax ACP-09CH25AEFI User Manual

OPERATING INSTRUCTIONS

NOTE: This manual does not include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.

Operating temperature

Mode
Temperature
Room temperature
Outdoor temperature
NOTE:
1. Optimum performance will be achieved within these operating temperatures.If air conditioner is used outside of
the above conditions, certain safety protection features might come into operation and cause the unit to function
abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high(over 80%) , condensed water may
drip out of the unit. Please sets the vertical air flow louver to
its maximum angle (vertically to the floor), and set HIGH fan mode.
Suggestion: For the unit adopts an Electric Heater, when the outside ambient temperature is below 0
strongly recommend you to keep the machine plugged in order to guarantee it running smoothly.
NOTE:
1. Optimum performance will be achieved within these operating temperatures.If air
conditioner is used outside of the above conditions, certain safety protection features might
come into operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high(over 80%) ,
condensed water may drip out of the unit. Please sets the vertical air flow louver to
its maximum angle (vertically to the floor), and set HIGH fan mode.
Suggestion: For the unit adopts an Electric Heater, when the outside ambient temperature is
O O
below 0 C(32 F), we strongly recommend you to keep the machine plugged in order to
guarantee it running smoothly.

Manual operation

Units are equipped with a switch to run emergency operation mode. It can be accessed by
opening the front panel. This switch is used for manual operation in case the remote controller
fails to work or maintenance necessary.
AUTO/COOL
Manual switch
Cooling operation
O O
17 C~32 C
O O
(62 F~90 F)
O O
-15 C~50 C
O O
(5 F~122 F)
(For the models with low
temperature cooling system)
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
1 Open and lift the front panel up to an angle
2 One press of the manual control switch will
3 Close the panel firmly to its original position.
●
●
Cooling operation
O O
0 C~30 C
O O
(32 F~86 F)
O O
-15 C~30 C
O O
(5 F~86 F)
until it remains fixed with a clicking sound.
lead to the forced AUTO operation. If press
the switch twice within five seconds, the unit
will operate under forced COOL operation.
CAUTION:
This switch is used for testing purposes
only. You had better not choose it.
To restore the remote controller operation,
use the remote controller directly.
7
7
Drying operation
O O
10 C~32 C
O O
(50 F~90 F)
O O
0 C~50 C
O O
(32 F~122 F)
O O
C(32 F), we