Recharging Battery - Pure Clean PUCRC25 User Manual

RECHARGING BATTERY

1. Before charging, make sure the battery is correctly installed.
2. To charge the product, connect the adapter output into the DC jack,
then plug the output into a wall outlet. A blue light will flash when
charging.
3. After it is fully charged, the indicator light will turn to a solid blue light.
4. When the product runs out of power, an LED indicator will turn red/
purple to signal that charging is needed.
5. To ensure the best performance and life span of the battery, please
charge the product for at least 3 hours continuously.
NOTE:
a. Charge the Mini Robotic Vacuum Cleaner for at least 8 hours before first
use.
b. When the battery is low, please charge as soon as possible.
c. If you are not using the robot for an extended period of time, please fully
charge the battery and remove it, then store it in a well ventilated and dry
place.
d. If the robot is unused for more than 3 months, please charge it for at least
8 hours before using again.
Adapter Plug
Adapter Plug Outlet
www.PyleUSA.com
7