Subscribe to Our Youtube Channel
Related Manuals for EL-CELL PAT-Clamp-1
Summary of Contents for EL-CELL PAT-Clamp-1
- Page 1 User Manual Release 1.0 PAT-Clamp-1 Docking station for a single PAT series test cell © 2019 EL-Cell GmbH...
- Page 2 The information in this manual has been carefully checked and believed to be accurate; however, no responsibility is assumed for inaccuracies. EL-Cell GmbH maintains the right to make changes without further notice to products described in this manual to improve reliability, function, or design. EL -Cell GmbH does not assume any liability arising from the use or application of this product.
-
Page 3: Table Of Contents
User Manual PAT-Clamp-1 Content 1 Product description ............................4 2 Installation ............................... 5 3 Cleaning ................................5 4 Operation modes ............................6 5 Cable colors and naming conventions ....................7 6 Unpacking................................ 8 7 Technical data ..............................8 8 Technical support ............................9 9 Warranty ................................ -
Page 4: Product Description
PAT-Clamp-1 1 Product description The PAT-Clamp-1 is a docking station for a single PAT series test cell. When docked into the PAT-Clamp-1, the test cell may be tested by any potentiostat or battery tester. The compatible test cells and the PAT-Core concept are covered in detail by other manuals: (https://el-cell.com/support/manuals). -
Page 5: Installation
PAT-Clamp-1 2 Installation Place the PAT-Clamp-1 on a flat, dry and clean surface, for example on a bench top, inside a temperature chamber or a glove box. Then connect the cell cable of your potentiostat or battery tester channel to either the banana sockets at the front of the PAT-Clamp-1 or the Sub-D connector on the opposite side. -
Page 6: Operation Modes
4 Operation modes Connect the cell cable of your potentiostat or battery tester channel to the banana sockets at the front of the PAT-Clamp-1. For the different operation modes, see the table below. Operation mode 1: Cell voltage control (1 vs 2) -
Page 7: Cable Colors And Naming Conventions
User Manual PAT-Clamp-1 5 Cable colors and naming conventions The naming convention and color codes of the potentiostat´s cell cable leads are not standardized between different manufacturers. The table below is an incomplete list of some popular instruments. Important note: The application of our test cells is not limited to the potentiostats listed below. -
Page 8: Unpacking
Check the contents of the packages against the list given below to verify that you have received all of the required components. Contact EL-CELL, if anything is missing or damaged. NOTE: Damaged shipments must remain within the original packaging for freight company inspection. -
Page 9: Technical Support
9 Warranty For a period of one year from the date of shipment, EL-Cell GmbH (hereinafter Seller) warrants the goods to be free from defect in material and workmanship to the original purchaser. During the warranty period, Seller agrees to repair or replace defective and/or noncon forming goods or parts without charge for material or labor, or, at the Seller’s option, demand return...
Need help?
Do you have a question about the PAT-Clamp-1 and is the answer not in the manual?
Questions and answers