Advertisement
PC CONFIGURATOR
With configurator software, settings shown below are available.
Refer to the software manual of R3CON for detailed operation.
■ CHANNEL INDIVIDUAL SETTING
PARAMETER
Zero Scale
Full Scale
Max Position
Reset Position
Drop-Out
Mode
Alarm level
Hyst.
■ CHANNEL BATCH SETTING
PARAMETER
Delay Time
Hold Time
TERMINAL CONNECTIONS
Connect the unit as in the diagram below.
■ EXTERNAL DIMENSIONS unit: mm (inch)
AVAILABLE RANGE
-32000 to +32000
-32000 to +32000
0 to 100,000,000
0 to 100,000,000
0.10 to 50.00 (%)
1: Speed/High, 2: Speed/Low, 3: Position/High,
4: Position/Low
Speed: 0.00 to 100.00 (%)
Position: -100,000,000 to 100,000,000
Speed: 0.00 to 100.00 (%)
Position: -100,000,000 to 100,000,000
AVAILABLE RANGE
0.0 to 60.0 (sec.)
0.0 to 60.0 (sec.)
27.5 (1.08)
1
20–M3
11
2
SCREW
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
TERMINAL
20
COVER
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
DEFAULT SETTING
0
10000
100,000,000
100,000,000
0.10 (%)
Alarm 1
1: Speed/High
Alarm 2
2: Speed/Low
Alarm 1
Speed: 80.00 (%)
Position: 100,000,000
Alarm 2
Speed: 20.00 (%)
Position: 100,000,000
Alarm 1
Speed: 5.00 (%)
Position: 1,000
Alarm 2
Speed: 5.00 (%)
Position: 1,000
DEFAULT SETTING
0.1 (sec.)
0.1 (sec.)
109 (4.29)
POSITIONING
GUIDE
R3-PA2
EM-8386 Rev.4 P. 3 / 5
Advertisement
