Tests With Clamps And Other Couplers; Verification Accessories - Ametek 200 Series Quick Start Manual And Safety Instructions

AMETEK CTS
5.5.1.

Tests with clamps and other couplers.

Be aware that coupling clamps, as defined by the standard, must be connected and usually adjusted due to
losses. These shall be used only in compliance with the standard.
WARNING: Coupling clamps are dangerous to touch and must not be approached during the
test run!
WARNING
5.5.2.

Verification Accessories

Consult the datasheet for verification accessories. Only genuine AMETEK CTS and EM Test accessories are
supported. Consult the standard for proper usage and when verification must take place.
Automotive Transient Immunity Testing
1.00 25 / 26