De La Espada McQueen Assembly Instructions

ASSEMBLY INSTRUCTIONS
MCQUEEN CHESTS BY MATTHEW HILTON
These instructions apply to all McQueen chests, with the
exception of McQueen Bedside Chest which is shipped fully
assembled.
PARTS
HARDWARE
12x M8x20 bolts
YOU WILL NEED
5mm heavy duty Allen Key
The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a flat
and stable surface. This will ensure a good final result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet "Unpacking Your Furniture" for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone flooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in A poor connection.
NOTE 6: While you work, be sure all connections are flush with
no gaps.
1x Chest body
4x Legs
Drawers
SALES@DELAESPADA.COM
DELAESPADA.COM
0
1
M
A
T
T
H
E
W
H
I
L
T
O
N