Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
391 HEPBURN MODULAR SOFA BY MATTHEW HILTON
PARTS
Seat and/or table modules to match your order
Leg bases to match your order
HARDWARE
(4x) M8x60 bolts per module
For connecting multiple bases, where relevant, the following
hardware per connection:
(4x) M8x15 bolts
(4x) M6x16 Panhead screws
YOU WILL NEED
4mm heavy duty Allen Key
6mm heavy duty Allen Key
The help of a friend
NOTES
NOTE 1: The assembly process is different for a sofa that rests
on one leg frame from a sofa that requires more than one leg
frame (such as a corner unit or extra long sofa). Pages 2 and 3
refer to the assembly of a sofa with one leg frame, and pages
4 through 8 refer to the assembly of a sofa with multiple leg
frames. Please turn to the correct pages for the unit ordered.
NOTE 2: Be certain that all assembly is carried out on a flat
and stable surface. This will ensure a good final result.
Reverse the steps to disassemble the piece.
NOTE 3: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our document "Unpacking Your Furniture" for further details.
NOTE 4: Great care is required when assembling our products as
they can mark very easily if banged or dropped. Use blankets
to soften the assembly surface - hard surfaces such as wood or
stone flooring may damage the furniture if in direct contact.
NOTE 5: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 6: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
(1x set)Connecting plate parts
SALES@DELAESPADA.COM
DELAESPADA.COM
0
1
M
A
T
T
H
E
W
H
I
L
T
O
N
Advertisement
Related Manuals for De La Espada MATTHEW HILTON 391 HEPBURN MODULAR SOFA
Summary of Contents for De La Espada MATTHEW HILTON 391 HEPBURN MODULAR SOFA
- Page 1 - hard surfaces such as wood or stone flooring may damage the furniture if in direct contact. NOTE 5: We advise that assembly and disassembly of De La Espada furniture is undertaken by a minimum of 2 people.
- Page 2 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON INSTRUCTIONS IMPORTANT NOTE: The following instructions are for a sofa with one leg frame only. To assemble a sofa with multiple leg frames, such as corner unit or extra long sofa, turn to page 4. 1) PLACE THE MODULES IN THE CORRECT ORDER a)Unpack components and lay them out so they are in the correct orientation according to your chosen configuration.
- Page 3 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON b) Flip the sofa on its side with the completely tightened bolt positioned nearest to the floor. This will allow the other mod- ules to slide down slightly into the correct position. c) Check that all modules are aligned, then tighten the remain- ing bolts completely.
- Page 4 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON IMPORTANT NOTE: The following instructions are for a sofa with multiple leg frames, such as corner unit or extra long sofa. To assemble a sofa with one leg frame only, turn to page 2. 1) CONNECT LEGS TO MODULES a)Unpack components and lay them out so they are in the correct orientation according to your chosen configuration.
- Page 5 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON 3) ATTACH CONNECTING PLATE NOTE: The connecting plate needs to be assembled differently for connecting a corner unit and for connecting more than one base in a straight line. Corner Unit Configuration a) Assemble the connecting plate for a corner unit configuration following the diagram below.
- Page 6 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON c) Align the holes in the connecting plate with the relevant holes in the leg frames. Insert a conical M8x15 bolt into each of the four holes and tighten firmly. d) The connection should look like this.
- Page 7 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON Straight Configuration a) Assemble the connecting plate for a straight configuration following the diagram below. Secure the parts with four M6x16 Panhead Screws tightened only loosely with an Allen Key. It is important that the screws are not tightened too much at this stage, to allow for adjustments later in the assembly pro- cess.
- Page 8 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON c) Align the holes in the connecting plate with the relevant holes in the leg frames. Insert a conical M8x15 bolt into each of the four holes and tighten firmly. d) The connection should look like this.
- Page 9 ASSEMBLY INSTRUCTIONS CONTINUED 391 HEPBURN MODULAR SOFA BY MATTHEW HILTON 4) ATTACH REMAINING MODULES a) Place one of the remaining modules onto the leg frame, and align it with the existing module. From below, ensure the holes in the leg frame are aligned with the legs in the sofa body, then insert an M8x60 bolt into each hole, and tighten firmly.