Advertisement
ASSEMBLY INSTRUCTIONS
COMMUNE DINING TABLE BY NERI&HU
PARTS
1x Tabletop
1x Leg frame
Hardware:
(4x) M8x20 black countersunk screws
YOU WILL NEED
-5mm Allen Key
-The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a flat
and stable surface. This will ensure a good final result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet "Unpacking Your Furniture" for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone flooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
NOTE 6: While you work, be sure all connections are flush with
no gaps.
NOTE 7: After assembly, ensure that the table is resting on a
level surface.
SALES@DELAESPADA.COM
DELAESPADA.COM
0
1
N
E
R
I
&
H
U
Advertisement
Table of Contents
Related Manuals for De La Espada COMMUNE DINING TABLE BY NERI&HU
Summary of Contents for De La Espada COMMUNE DINING TABLE BY NERI&HU
- Page 1 NOTE 4: We advise that assembly and disassembly of De La Espada furniture is undertaken by a minimum of 2 people. NOTE 5: When screwing in bolts, tighten well, but be sure NOT TO OVERTIGHTEN.
- Page 2 ASSEMBLY INSTRUCTIONS CONTINUED COMMUNE DINING TABLE INSTRUCTIONS 1) ATTACH LEG FRAME TO THE TABLETOP a) Place the tabletop upside down a clean, soft surface such as blanket or carpet on the floor. b) Turn the leg frame upside down, and insert the connection plates on the legs into the rebates on the underside of the tabletop.
- Page 3 ASSEMBLY INSTRUCTIONS CONTINUED COMMUNE DINING TABLE d) The assembly should now look like this. & 2) TURN THE TABLE INTO AN UPRIGHT POSITION a) With the help of a friend, carefully turn the table over into an upright position, taking care not to place any weight/ force on the table legs while turning.
Need help?
Do you have a question about the COMMUNE DINING TABLE BY NERI&HU and is the answer not in the manual?
Questions and answers