Page 1
ASSEMBLY INSTRUCTIONS 764M SHAKER DINING TABLE (MARBLE TOP) BY NERI&HU PARTS 1x Marble tabletop 1x Tabletop Subframe 2x Leg frames & 1x Cross beam Hardware: (15x) M8x60 Screws (12x) M8x50 Countersunk Screws (15x) M8 washers YOU WILL NEED -6mm Allen Key...
Page 2
NOTE 7: We advise that assembly and disassembly of De La Espada furniture is undertaken by a minimum of 2 people. The marble top must be handled by a minimum of 4 people.
Page 3
ASSEMBLY INSTRUCTIONS CONTINUED 764M SHAKER DINING TABLE INSTRUCTIONS 1. ATTACH LEG FRAMES TO THE SUBFRAME a) Place the subframe upside down a clean, soft surface such as blanket or carpet on the floor. b) One at a time, place each leg frame face down, matching the number the leg frame with the number marking on the subframe.
Page 4
ASSEMBLY INSTRUCTIONS CONTINUED 764M SHAKER DINING TABLE 3) ATTACH TABLETOP SUBFRAME a) With the help of a friend, carefully turn the assembled substructure over into an upright position, taking care not to place any weight/force on the table legs while turning.
Page 5
ASSEMBLY INSTRUCTIONS CONTINUED 764M SHAKER DINING TABLE & e) The table is now ready for use.
Need help?
Do you have a question about the 764M SHAKER and is the answer not in the manual?
Questions and answers