Advertisement
ASSEMBLY INSTRUCTIONS CONTINUED
MCQUEEN CHESTS
1) ATTACH FEET
a)Place the chest so its back is against the floor.
b)Locate the pre-drilled holes on the underside of the chest
c)Place one of the feet against the bottom of the chest, align-
ing the holes in each component. Insert an M8x20 bolt into each
hole and tighten firmly with a 5mm Allen Key. Be careful not to
overtighten. Repeat for each foot until complete.
2) TURN THE CHEST INTO AN UPRIGHT POSITON
a) With the help of a friend, turn the chest so it is in a nat-
ural upright position. Be careful to avoid allowing the chest
to rest on one or two legs while turning as this may damage the
connection.
3) INSERT THE DRAWERS
NOTE: You will ensure the best fit by making sure all drawers
are placed in the correct position within the cabinet. Each
drawer has a number on it's back that corresponds to the number
on the internal back panel of the cabinet where it should be
placed.
a) To install each drawer, locate the orange release clips on
the base of the drawer, and pull them toward the front of the
drawer while inserting the drawer into the cabinet. Once the
drawer is halfway in, release your hands from the clips, and
push the drawer closed.
0
2
M
A
T
T
H
E
W
H
I
L
T
O
N
Advertisement
