PROAIM SL-SKTE-0277 Assembly Manual

Skate adjustable length slider

Skate Adjustable Length Slider

(SL-SKTE-0277)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Carriage Lock

Camera Mounting Screws:

1/4"-20 & 3/8"-16

Bag Packing

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SL-SKTE-0277 and is the answer not in the manual?

Page 1 Skate Adjustable Length Slider (SL-SKTE-0277) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Skate Adjustable Length Slider Setup Begin by taking out the mainframe from the case/Bag.  If you need to secure the camera plate at a static position, then tighten the provided knob.  You can adjust the height of feet or remove the feet by loosen the provided knob according to your requirement.
Page 3 Camera plate is equipped with numerous 1/4”-20, 3/8”-16 threads that allows you to mount the camera directly. YOUR PROAIM SKATE ADJUSTABLE LENGTH SLIDER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.