Revisions - Mitsubishi MELSEC-Q Q62HLC User Manual

Loop control module
Hide thumbs Also See for MELSEC-Q Q62HLC:
Table of Contents

Advertisement

[WIRING PRECAUTIONS]
Do not grab on the cable when removing the communication or power cable
connected to the module.
When disconnecting a cable without a connector, first loosen the screws on
the part that is connected to the module.
Pulling the cable when it is still connected to the module may cause damage
to the module or cable, or misoperation due to cable contact failure.
Always ground the FG terminal and the shielded cable for the
programmable controller.
There is a risk of electric shock or malfunction.
When turning on the power and operating the module after wiring is
completed, always attach the terminal cover that comes with the product.
There is a risk of electric shock if the terminal cover is not attached.
Use applicable solderless terminals and tighten them with the specified
torque. If any solderless spade terminal is used, it may be disconnected
when the terminal screw comes loose, resulting in failure.
When wiring, be sure to verify the rated voltage of the product as well as the
terminal layout. Fire or failure may result if incorrect voltage is input or
incorrect wiring is performed.
Connecting terminals with incorrect voltage may result in malfunction or
mechanical failure.

REVISIONS

The manual number is given on the bottom right of the top cover.
Print Date
Oct., 2005
IB (NA)-0800319-A First edition
Nov., 2007
IB (NA)-0800319-B PARTIAL CORRECTION
Feb., 2008
IB (NA)-0800319-C PARTIAL CORRECTION
This manual confers no industrial property rights or any rights of any other kind,
nor dose it confer any patent licenses. Mitsubishi Electric Corporation cannot
be held responsible for any problems involving industrial property rights which
may occur as a result of using the contents noted in this manual.
© 2005 MITSUBISHI ELECTRIC CORPORATION
CAUTION
Manual Number
Revision
SAFETY PRECAUTIONS, Section 2.2,
Chapter 4, Chapter 5
SAFETY PRECAUTIONS, Conformation
to the EMC Directive and Low Voltage
Instruction, Section 2.1, 2.2, 2.3, 2.4, 3.1,
Chapter 6
A-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec-q q62hlc-u-hw

Table of Contents