Table of Contents
Advertisement
Figure 1 Product components
1 Solenoid valves, 3-way, with fittings for glued connections
(2x)
2 Replacement fittings for threaded pipe connections (6x)
Installation
Wall mounting
Multiple hazards. Only qualified personnel must conduct the tasks described in this
section of the document.
Attach the solenoid valves to a flat, vertical surface. The valve orientation is not important.
Make sure that the valve mounting is sufficient to hold the weight of the solenoid valves.
Install the solenoid valves in a location where there is sufficient space to make
connections.
3 Flow control valves, ½-inch NPT PVC (2x)
4 Reducer bushings, ¾-inch MPT x ½-inch FPT (3x)
D A N G E R
3
Advertisement
Table of Contents
