Download Print this page

Hach Surface Scatter 7 sc Instruction Sheet

Converting turbidimeter to ss7 sc-hst
Hide thumbs Also See for Surface Scatter 7 sc:

Advertisement

Quick Links

Converting the Surface Scatter

Safety information

Please read this entire document before unpacking, setting up, or operating this equipment.
Pay attention to all danger and caution statements. Failure to do so could result in serious
injury to the operator or damage to the equipment.
To ensure that the protection provided by this equipment is not impaired, do not use or install
this equipment in any manner other than that specified in this document.
Use of hazard information
DANGER
Indicates a potentially or imminently hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate injury.
Important Note: Information that requires special emphasis.
Note: Information that supplements points in the main text.
Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or damage to the
instrument could occur if not observed. A symbol, if noted on the instrument, will be included
with a danger or caution statement in the manual.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of-life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.
CAUTION
Read and follow these instructions carefully to avoid personal injury and damage to the
instrument. Only personnel qualified to do so should conduct the
installation/maintenance tasks described in this instruction sheet.
ATTENTION
Lire et suivre ces instructions attentivement pour éviter les risques de blessures de
personnes et de détérioration de l'appareil. Les tâches d'installation et d'entretien
décrites dans cette partie de la fuelle d'instructions doivent être seulement effectuées
par le personnel qualifié pour le faire.
ADVERTENCIA
Lea y siga cuidadosamente estas instrucciones a fin de evitar accidentes personales y
daños al instrumento. Las tareas de instalación y mantenimiento descritas en esta hoja
de instrucciones deberán ser efectuadas únicamente por personas debidamente
cualificadas.
Instruction Sheet
®
7 sc Turbidimeter to SS7 sc-HST
4500089
1

Advertisement

loading

Summary of Contents for Hach Surface Scatter 7 sc

  • Page 1: Safety Information

    Instruction Sheet 4500089 ® Converting the Surface Scatter 7 sc Turbidimeter to SS7 sc-HST Safety information Please read this entire document before unpacking, setting up, or operating this equipment. Pay attention to all danger and caution statements. Failure to do so could result in serious injury to the operator or damage to the equipment.
  • Page 2: Installation

    Remove the kit from the shipping container and inspect each item for damage. Verify that all items are included. If any items are missing or damaged, contact Hach Customer Service in Loveland, Colorado. The Hach Company toll free phone number for customers within the United States is 800-227-4224.
  • Page 3 ® Converting the Surface Scatter 7 sc Turbidimeter to SS7 sc-HST 1. If upgrading a standard SS7 sc (or older) turbidimeter, remove the hose fittings from the slant tube and the bulkhead adapters along with the hoses inside the unit. Then remove the bulkhead adapters at the bottom of the unit and proceed to step 2.
  • Page 4: Operation

    ® Converting the Surface Scatter 7 sc Turbidimeter to SS7 sc-HST 9. Install the vent cover on the top of the slant tube using the threaded disk and ¼-inch screw. Tighten until snug. 10. Tighten the screws that hold the light source. 11.
  • Page 5 ® Converting the Surface Scatter 7 sc Turbidimeter to SS7 sc-HST Figure 2 Surface Scatter 7 sc and HST upgrade components...
  • Page 6: Replacement Parts

    HACH COMPANY In the U.S.A. – Call toll-free 800-227-4224 WORLD HEADQUARTERS Outside the U.S.A. – Contact the HACH office or distributor serving you. Telephone: (970) 669-3050 On the Worldwide Web – www.hach.com ; E-mail – techhelp@hach.com FAX: (970) 669-2932 © Hach Company, 2006...