Removing The Embroidery Foot - Brother Innov-ís 1000 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Removing the embroidery foot

a Press
twice to raise the needle.
a Needle position button
b Turn off the sewing machine.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
d While pressing in the lever at the back of the
embroidery foot with your finger, loosen the
presser foot holder screw, and then remove
embroidery foot "Q".
Turn the screwdriver toward the back.
e Attach the presser foot holder.
• For details, refer to "Attaching the presser foot
holder" (page 44).
(Needle position button) once or
1
a
Attaching the Embroidery Foot 135
4