Attaching The Embroidery Foot - Brother Innov-ís 1000 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Attaching the Embroidery Foot

This section describes how to attach the embroidery foot.
Attaching the embroidery foot
Attach the embroidery foot when embroidering.
Have the included embroidery foot "Q" and a
screwdriver ready.
a Embroidery foot bar
b Caught by the presser foot holder screw
CAUTION
● Always use the embroidery foot "Q" when
embroidering. If the wrong presser foot is
used, the needle may hit the presser foot
and break or bend.
a Press
twice to raise the needle.
a Needle position button
The needle goes up.
Turn off the sewing machine.
b
1
2
(Needle position button) once or
1
CAUTION
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
button) is accidentally pressed and the
machine starts sewing.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d Press and hold the black button on the back of
the presser foot holder to detach the presser
foot.
a
b
a Black button
b Presser foot holder
Attaching the Embroidery Foot 133
(Start/stop
a
4