Brother DCP-115C User Manual page 98

Main Menu Submenu
3.LAN 2.TCP/IP
(WLAN)
(DCP-340CW
only) (Continued)
(Continued)
3.Setup WLAN
4.WLAN
Status
5.Setup
Misc.
6.Network
I/F
0.Factory
Reset
The factory settings are shown in Bold.
A - 8 APPENDIX
Menu Options
Selections
[000-255].
4.Gateway
[000-255].
[000-255].
[000-255]
5.Node Name BRW_XXXXXX
6.WINS Auto
Config
Static
7.WINS (Primary)
Server 000.000.000.000
(Secondary)
000.000.000.000
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
9.APIPA On
Off
—
1.Setup
Wizard
—
2.SecurEasySetup
—
1.Status
—
2.Signal
—
3.SSID
—
4.Comm.Mode
—
5.Security
Mode
1.Wired LAN Auto
100B-FD
100B-HD
10B-FD
10B-HD
—
Wired LAN
WLAN
—
Reset
Exit
Descriptions Page
Enter the Gateway See
address.
Network
User's
Guide
on the
Enter the Node
CD-ROM
name.
You can choose the
WINS configuration
mode.
Specifies the IP
address of the
primary or secondary
server.
Specifies the IP
address of the
primary or secondary
server.
Automatically
allocates the IP
address from the
link-local address
range.
You can configure
your print server.
You can configure
the wireless network
easily.
You can see the
current wireless
network status.
You can see the
current wireless
network signal
strength.
You can see the
current SSID.
You can see the
current
Communication Mode.
You can see the
current wireless
network security
settings.
Selects Ethernet link
mode.
You can choose the
network connection
type.
Restores all wired
and wireless Network
settings to the factory
default.