The print quality can be affected by the type of paper you use in the
To get the best print quality for the settings you've chosen, always
set the Paper Type to match the type of paper you load.
You can use plain paper, inkjet paper (coated paper), glossy paper,
transparencies and envelopes.
We recommend testing various paper types before purchasing large
For best results, use the recommended paper.
When you print on inkjet paper (coated paper),
transparencies and glossy paper, be sure to select the
proper media in the "Basic" tab of the printer driver or in the
Paper Type setting of the menu.
When you print on Brother glossy paper, load the instruction
sheet included with the glossy paper in the paper tray first,
and then place the glossy paper on the instruction sheet.
When you use transparencies or glossy paper, remove each
sheet immediately to prevent smudging or paper jams.
Avoid touching the printed surface of the paper immediately
after printing. The surface may not be completely dry and
may stain your fingers.
To get the best print quality, we suggest using Brother paper.
(See table below.)
If Brother paper is not available in your country, we recommend
testing various papers before purchasing large quantities.
We recommend using "3M Transparency Film" when you print on
A4 Inkjet (Photo Matte)
10 x 15 cm Glossy
INTRODUCTION 1 - 8