Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you're using the PhotoCapture Center
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
This message will appear if you try to access a media
card in the drive (slot) that does not contain a .JPG file.
This message will appear if you are working with
Out of Memory
images that are too large for the machine's memory.
Using PhotoCapture Center
You can access the media card that is in the media drive (slot) of the
machine from your computer.
users, see PhotoCapture Center™ on page 7-1 in
Software User's Guide on the CD-ROM and for Macintosh
see PhotoCapture Center™ on page 12-2 in Software User's Guide
on the CD-ROM.)
3 - 16 WALK-UP PHOTOCAPTURE CENTER