Product Servicing - Leckey Squiggles Stander User Manual

p38 Squiggles Stander - User Manual
Before re-issuing a product, we
recommend it is disinfected using the
following procedure:
Note: Always clean the product first to
remove accumulated soiling prior to
disinfecting/sanitisin
1. Where possible, we recommend
the use of an automated "fogger"
disinfection system that is used
to completely cover the product
surfaces with a disinfectant agent.
The manufacturer's instructions for
the chosen system should be referred
to prior to use and followed exactly.
2. Where an automated disinfection
system is not available, all product
surfaces should be wiped over
with disinfectant surface wipes or
liquid disinfectant on a soft cloth.
Suitable products are 70% IPA,
70% Alcohol or diluted bleach. The
manufacturer's instructions for the
chosen product should be followed.
Product upholstery and fabrics
should be cleaned thoroughly in
accordance with section, Cleaning
and Care Information, of this manual.
Ensure a copy of the user manual is
supplied with the product. A copy can be
downloaded from our website
www.leckey.com
Leckey recommend that a written record
is maintained of all product inspections
carried out during the reissue of the
product.
SECTION 17:

PRODUCT SERVICING

Servicing of all Leckey products should
only be carried out by technically
competent persons who have been
trained in the use of the product.
All international service enquiries should
be directed to the appropriate Leckey
distributor who will be delighted to assist
you. For further information on Leckey
distributors please visit our website
www.leckey.com