Leckey Squiggles Stander User Manual page 24

p24 Squiggles Stander - User Manual
11.6 CHEST AND HIP
SUPPORT HARNESS
To change the width of the chest
harness, lift the front cover, adjust the
Velcro straps and set to the desired
width and replace the cover.
Always make sure the plastic
buckles are fully engaged
when using the chest harness.
11.7 ADJUSTING THE
STERNUM PAD
The sternum pad can be raised to provide
additional support to assist thoracic
extension. This also allows the chest
support to be set lower to enable greater
freedom of arm movement. The sternum
plate is adjusted by loosening the two
bolts at the front of the chest plate with
the multi-tool, set to the desired height
and retighten.
Always use caution to ensure
fingers do not become
trapped when adjusting the
sternum pad.