Leckey Squiggles Stander User Manual page 19

10.4 PELVIC HARNESS
To attach the pelvic harness, simply slide
the left and right sides of the harness
over the lateral supports. Sleeve the
plastic buckles through the slots in
the harness. Then bring the Velcro
fastener straps around the bottom of the
moulding and attach them to the Velcro
panels as shown.
Finally pull the Velcro receiving straps
around the user to secure the user in the
harness.
Squiggles Stander - User Manual
For positional and safety
reasons the pelvic harness
must be used at all times with
the mobile stander.
10.5 HIP SUPPORT
HARNESS
The hip support should be attached
around the pelvic harness as an
additional safety support should the
Velcro on the pelvic harness begin to
wear. It can be attached by clipping the
male buckle into the female buckle at
either end of the pelvic harness.
p19