Table of Contents
Advertisement
Example: air-conditioned suspension seat
Before adjusting the seat, read the important
safety notes about the seats. Depending on the
seat design, some adjustment options may not
be available.
X
When adjusting the seat, make sure that there
is sufficient clearance, in particular behind
the seat.
X
To adjust the neck cushion: press the press
studs on the rubber straps and adjust neck
cushion ; accordingly to suit your height.
X
Release the press studs.
X
To set the belt height: press and hold the
button on belt sash guide :.
X
Adjust belt sash guide : accordingly to suit
your height.
X
Release the button.
X
To adjust the armrests: swing seat armrests
= upwards.
X
Use the handwheel on the underside to set
the angle of seat armrests =.
X
To adjust the seat cushion angle: press
lever ? downwards and hold it.
X
Apply weight to or relieve the seat cushion or
backrest of any weight in order to move it into
the desired position.
X
Release lever ?.
X
To adjust the backrest: relieve the backrest
of any weight.
X
Pull lever ? up and hold it.
X
Apply weight to or relieve the seat backrest of
any weight in order to move it into the desired
position.
X
Release lever ?.
X
To set the upper portion of the backrest:
pull lever K on the rear of the backrest
upward and hold it.
X
Tilt the upper portion of the seat backrest to
the desired position.
X
Release lever K.
X
To adjust the seat height: pull lever A up or
push it down one level.
The seat is raised or lowered by one level.
X
To set the seat fore-and-aft adjustment:
pull lever E upwards and hold it.
X
Push the seat forwards or backwards in order
to move it into the desired position.
X
Release lever E.
X
Slide the seat forwards or backwards until it
engages audibly.
X
To adjust the seat cushion length: pull
lever H upwards and hold it.
X
Push the seat cushion forwards or backwards
in order to move it into the desired position.
X
Release lever H.
X
To adjust the oscillation damper: set the
oscillation damper level by level using lever
G to prevent the seat from bottoming out.
X
To release the seat fore-and-aft suspen-
sion lock: move lever I downwards.
The seat is able to oscillate freely.
X
To engage the seat fore-and-aft suspen-
sion lock: move lever I upwards.
The seat fore-and-aft suspension engages
and the seat suspension is locked in place.
X
To switch on the seat heating: press the
e upper section of switch B.
The seat heating is active and is set to the first
heating level.
or
X
Press the d lower section of switch B.
The seat heating is active and is set to the
second heating level.
X
To deactivate the seat heating: press
switch B into the centre position.
X
To switch on seat ventilation: turn s
blower control unit C from position 0 down-
ward.
The airflow increases in 3 levels.
X
To switch off seat ventilation: turn s
blower control unit C completely upward.
Seats
75
Z
Advertisement
Table of Contents
