Table of Contents
Advertisement
Introduction
30
such as leaves, grass or twigs can gather
between the underbody and the underbody pan-
elling. If these materials come in contact with
hot parts of the exhaust system for an extended
period, they can catch fire.
G
WARNING
Flammable material such as leaves, grass or
twigs may ignite if they come into contact with
hot parts of the exhaust system. There is a risk
of fire.
When driving off road or on unpaved roads,
check the vehicle's underside regularly. In
particular, remove parts of plants or other
flammable materials which have become
trapped. In the case of damage, contact a
qualified specialist workshop.
Have the vehicle checked and repaired immedi-
ately at a qualified specialist workshop. If, on
continuing your journey, you notice that driving
safety is impaired, pull over and stop the vehicle
immediately, paying attention to road and traffic
conditions. In such cases, consult a qualified
specialist workshop.
Declarations of conformity
Vehicle components which receive
and/or transmit radio waves
The following note refers to all components of
the vehicle which receive and/or transmit radio
waves and the integrated information systems
and communications equipment in the vehicle:
The components of the vehicle that receive
and/or transmit radio waves are compliant with
the basic requirements and all other relevant
regulations stipulated by Directive
2014/53/EU.
Electromagnetic compatibility
The electromagnetic compatibility of the vehicle
components has been checked and certified
according to the currently valid version of Direc-
tive ECE-R 10.
Jack
Transcript and translation of the original decla-
ration of conformity:
EC Declaration of conformity 2006/42/EC
WEBER-HYDRAULIK GMBH, Heilbronner Str. 30,
74363 Güglingen, Germany, declares that the
product "Weber hydraulic jack" models:
A AD ADX AH AHX AL AT ATD ATDX ATG ATN
ATGX ATPX ATQ AX
Load: 2,000 to 100,000 kg
Serial no.: from construction year 01/2010
comply with the relevant fundamental regula-
tions of the EC machinery directive for safety
and health.
This EC declaration of conformity shall become
void:
if modifications are made or repairs are car-
R
ried out by unqualified persons
if the products are not employed in accord-
R
ance with the application specified in the
Operating Instructions
if the mandatory regular inspections are not
R
carried out
Relevant EC Directives: Machinery guideline
mark 2006/42/EC
Applicable norms: ISO 11530
Quality assurance: DIN EN ISO 9001:2000
Güglingen, 1 July 2013
Signed by:
Managing Director, WEBER-HYDRAULIK GmBH
Authorised technical documentation represen-
tative, WEBER-HYDRAULIK GmBH
Heilbronner Straße 30, 74363 Güglingen, Ger-
many
Diagnostics connection
The diagnostics connection is used for connect-
ing diagnostic equipment at a qualified special-
ist workshop.
G
WARNING
If you connect equipment to a diagnostics
connection in the vehicle, it may affect the
operation of vehicle systems. As a result, the
operating safety of the vehicle could be affec-
ted. There is a risk of an accident.
Advertisement
Table of Contents
