Table of Contents
Advertisement
Lighting system
98
Replacing bulbs
Six-chamber lamp cluster, rear left (example: plat-
form truck)
Six-chamber lamp cluster, rear right (example:
platform truck)
Bolts
:
Perimeter/side marker lamps
;
Turn signal lamps
=
Brake lamp
?
Reversing lamp
A
Rear lamps
B
Rear foglamp
C
The licence plate lamp is behind the reflector
unit.
If the vehicle lamp cluster unit has LED modules,
do not replace the bulbs in the turn signals, tail
lamps, brake lamps or perimeter lamps. If nec-
essary, have these bulbs replaced at a qualified
specialist workshop.
Observe the notes on replacing bulbs
Y
(
page 91).
X
Remove bolts :.
X
Remove the lamp lens.
X
Turn the bulb anti-clockwise, applying light
pressure, and remove it.
X
Insert the new bulb and turn clockwise, apply-
ing light pressure.
Interior lighting
Interior lighting/reading lamp
Observe the notes on replacing bulbs
Y
(
page 91).
X
Prise off the lamp lens with a screwdriver.
X
Interior lighting :/nightlight ;/reading
lamp =: turn the bulb anti-clockwise, apply-
ing light pressure, and remove it.
X
Insert the new bulb and turn clockwise, apply-
ing light pressure.
Reading lamp: bed/berth
Reading lamp: bed/berth
Observe the notes on replacing bulbs
Y
(
page 91).
X
Prise the lamp lens out of the pivot hinge
using a screwdriver.
X
Remove the bulb.
X
Insert the new bulb.
Advertisement
Table of Contents
