Table of Contents
Advertisement
On-board computer
150
X
Change the setting with the u or t
button.
If you set the delayed switch-off to
surround lighting is switched off.
Vehicles with rain and light sensor: surround
lighting is switched on for the delayed switch-
off time set if you:
unlock the vehicle with the remote control
R
in the dark
open a door in the dark
R
Vehicles without rain and light sensor: sur-
round lighting is switched on for the delayed
switch-off time set if you:
unlock the vehicle with the remote control
R
switch off the dipped-beam headlamps or
R
side lamps, switch off the ignition and open
a door within approximately 4 minutes
X
To switch the automatic control of the
interior lighting on/off: use the r or
s button to select
light
control.
i
Depending on the equipment, the menu
item may not be available.
X
Press the u or t button to activate or
deactivate automatic control.
The interior lights and the entrance lighting
switch on automatically if the automatic con-
trol is switched on and you open a door. You
will find further information on automatic con-
trol of the interior lighting under "Interior
Y
lighting" (
page 90).
X
To switch the nightlight on/off: use the
r or s button to select Nightlight.
i
The nightlight is used as non-dazzle cour-
tesy lighting while driving.
Depending on the equipment, the menu item
may not be available.
X
Press the u or t button to activate or
deactivate the nightlight.
If you select the
will automatically switch on when the dipped-
beam headlamps have been switched on.
Language menu window
The languages available depend on the country
in which the vehicle is sold. All text displays are
shown in the set language. You can install more
languages.
0
s, the
Automatic interior
Auto
setting, the nightlight
Information on installing more languages can be
obtained from any Mercedes-Benz Service
Centre.
X
Use the u or t button to scroll to ä
settings.
X
Use the r or s button to scroll to the
Language
menu window.
X
To set the language: press the 9 button.
The input window displays a selection of lan-
guages.
X
Select the desired language with the r or
s button.
X
Change the setting with the u button.
Service products menu window
General notes
!
When you change the service product data
via the on-board computer, the maintenance
system adjusts the maintenance due dates
accordingly.
Set the data for the service products added.
Otherwise, the assemblies could be dam-
aged.
Observe the information under "Service prod-
Y
ucts" (
page 418).
Engine fuel grade
!
A high fuel sulphur content accelerates the
ageing process of the engine oil and can dam-
age the engine and exhaust system.
Before delivery, the fuel sulphur content is set to
the standard of the country of delivery or the
permissible fuel sulphur content for BlueTec
vehicles.
Observe the notes on diesel fuel and fuel grade
in the "Diesel fuel" section (
Engine oil viscosity
Set the viscosity classification (SAE class) of the
Engine Oil
engine oil used under
Engine oil grade
!
If you mix engine oils with differing oil
grades, the change interval for the engine oil
is reduced in comparison to mixtures of
engine oil of identical grade.
Therefore, only mix engine oils of differing
grade in exceptional circumstances. To pre-
vent damage to the engine, set the sheet
®
Y
page 422).
viscosity.
Advertisement
Table of Contents
