Table of Contents
Advertisement
FleetBoard vehicle computer
:
Card slot (FleetBoard DriverCard)
;
LED indicator lamp
=
Ñ Home-Call button
?
å Event-Call button
A
Ó Service-Call button
B
U Inoperative
C
The FleetBoard Truck Data Center 6 (FB card) is
the vehicle computer for FleetBoard. It is fitted
in the vehicle and is visible in the cab.
The corresponding basic wiring is required to
operate the FleetBoard Truck Data Center 6 (FB
card). A valid framework agreement with a
respective service booking is required for use of
the FleetBoard services. The FleetBoard Truck
Data Center 6 (FB card) is a prerequisite for
using connectivity services for FleetBoard.
FleetBoard services
With the FleetBoard Truck Data Center 6 (FB
card), it is possible to transfer all data generated
by vehicles and drivers. A valid framework
agreement with a respective service booking is
required for use of the FleetBoard services.
Overview of FleetBoard services:
Operational analysis and reports assists in
R
reducing fuel consumption and wear and tear.
Values such as speed, braking characteristics
and average total fuel consumption point out
potential improvements for a more economi-
cal driving style. This information can be sum-
marised in the form of monthly reports,
including an evaluation.
Mapping and journey recording presents
R
vehicle data on a digital street map which can
be retraced exactly.
Driver card and mass storage device
R
download allows the driver card and mass
storage device to be downloaded automati-
cally from the vehicle (a digital tachograph is
required to carry out the driver card and mass
storage device download).
FleetBoard Truck Data Center 6 (FB Card)
Time recording provides an overview of the
R
current driving and rest periods of drivers.
Messaging facilitates communication
R
between the driver and logistics via DispoPi-
lot.guide (DispoPilot.guide is not included in
the scope of delivery).
Trailer services links data on the truck and
R
trailer to one another.
Inserting/removing the FleetBoard
DriverCard
FleetBoard DriverCard
The FleetBoard DriverCard is used to identify the
driver for driver-related evaluation.
Avoid touching the contact surface points of
memory chip : with your fingers. Otherwise,
errors could occur when reading memory
chip :.
X
Switch the ignition lock to the drive position.
Before beginning the journey/trip:
X
To insert: insert FleetBoard DriverCard ;
into the card slot of the FleetBoard vehicle
computer until it engages.
The lettering and memory chip : on the
FleetBoard DriverCard ; must be face up. If
the FleetBoard DriverCard ; is inserted
incorrectly, a warning tone sounds.
After the end of the journey/trip:
X
To remove: remove FleetBoard Driver-
Card ; from the card slot.
201
Z
Advertisement
Table of Contents
