Brother 1240 Service Manual page 84

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(3) Bend the tray extension flap upwards slightly to remove the tray extension flap.
(4) Release the rear cover springs Left and Right from the hooks on the main cover.
(5) Remove the rear cover complete with the rear cover springs Left and Right from the main
cover.
(6) Remove the four pinch rollers and four pinch roller springs by moving them to the vertical
and then removing them by lifting them upwards.
Pinch roller
Pinch roller
spring
Fig. 4-23
Step (6)
Pinch roller
Fig. 4-24
4-14
Tray extension flap
Main cover
Rear cover
Rear cover
spring R/L
Main cover
Rear cover
Step (4)