Network Board Operation (For Hl-1270N Only); Preparing The Br-Net Board; Connect The Ethernet Cable; Install The Bradmin32: Configuration Utility (For Windows 95/98/Nt 4.0 Users Only) - Brother 1240 Service Manual

Brother laser printer service manual hl-1030, 1240, 1250, 1270n
Table of Contents

Advertisement

6.

NETWORK BOARD OPERATION (FOR HL-1270N ONLY)

The network board installed in the back of the printer allows you to share the printer on a
network.
6.1

Preparing the BR-net Board

6.1.1

Connect the Ethernet cable

(1) Turn off the printer power.
(2) Connect one end of the Ethernet
cable to the 10/100Base TX port of
the HL-1270N.
(3) Connect the other end of your
Ethernet cable to a free port on
your Ethernet hub.
(3) Turn on the printer power.
6.1.2

Install the BRAdmin32: configuration utility (for Windows 95/98/NT 4.0 users only)

NOTE:
If you use another operating system, refer to the Network User's Guide on the supplied CD-
ROM.
(1) Insert the supplied CD-ROM into your CD-ROM drive.
(2) Select the HL-1270N model button
and follow the screen instructions.
(3) The BRAdmin32 utility will then be
installed onto your computer. When
the software is installed, re-boot
your computer.
(4) The Troubleshooting information
table on the right contains further
configuration details.
CHAPTER 2 INSTALLATION AND BASIC OPERATION
Hub
2-17
Fig. 2-29
Fig. 2-30
Fig. 2-31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1270nHl-1030Hl-1240Hl-1250Hl-1270n1250

Table of Contents