Front Cover - Brother 1240 Service Manual

3.5

Front Cover

(1) Open the front cover.
(2) Remove the four M3x8 Taptite screws from the main cover.
Main cover
(3) Position the front cover at the angle of 45 degrees and release the bosses at the right and
left hand sides and the link at the left hand side.
(4) Remove the front cover.
(boss)
Link
Step (3)
Taptite, bind M3x8
Fig. 4-17
Front cover
Fig. 4-18
4-11
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Taptite, bind M3x8
Front cover
45
(boss)
Front cover