Brother 1240 Service Manual page 100

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
!
CAUTION:
When re-assembling the base plate, be sure that the ground wire connected to the paper
feed roller ASSY is fixed into the slit on the plastic chute referring to the figure below;
When securing the screws to assemble the base plate, ensure you use the jig shaft
referring to the figure below so that the engine PCB is assembled correctly;
Main frame
Ground wire
Plastic chute
Jig shaft
Taptite, bind M4x10
Fig. 4-49
Taptite, bind M4x10
Fig. 4-50
4-28
(slit)
Main frame
Base plate