Identify The Problem - Brother 1240 Service Manual

1.3

Identify the Problem

If you encounter any printer error or problem, first identify it referring to the chart below, then see the appropriate section.
NOTE:
The following troubleshooting sections contain both the actions which users should take or check and the ones which service technicians should
perform.
The printer does not print.
LED is blinking.
2.1 'Operator Calls'
2.2 'Service Calls'
Status monitor error 3.1 'Error Messages
message appears.
in the Status Monitor'
Error message is
3.2 'Error Message Printouts'
printed.
The printer does
4.1 'Paper Loading Problems'
not load paper.
Paper jam occurs.
4.2 'Paper Jams'
The printer does
5. 'Software Setting Problems'
not start printing.
9. 'Network Problem'
Turn off and on the printer
power switch.
(Service errors
only)
(The same error appers.)
(Service errors
only)
6. 'Malfunctions'
6-3
Printed page has a problem.
Printed image has
7 'Image Defects'
a problem.
4.2 'Paper Feeding Problems'
Printout is not
8 'Incorrect Printout'
correct.
CHAPTER 6 TROUBLESHOOTING