Brother 1240 Service Manual page 78

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
NOTE:
When re-assembling the pressure plate ASSY, ensure that the paper indicator arm is under the
pressure plate.
!
CAUTION:
When unhooking the catches to remove the pressure plate, do not bend the pressure plate,
gently ease the plastic cover. If the pressure plate is deformed, paper feeding problems may
occur.
(14) Remove the release lever extension spring.
(15) Unhook the two catches and rotate the lock lever to remove it downwards from the
cassette.
extension spring
NOTE:
When re-assembling the lock lever, insert it upwards from underneath the cassette and rotate it
until the two catches lock into place..
(16) Slide the rear paper guide fully forwards in the cassette and remove it from the slot.
Release lever
Lock lever
Rear paper guide
Paper cassette
Fig. 4-11
Fig. 4-12
4-8
Paper cassette