Front Cover - Brother HL-1110 Service Manual

7.11 Front cover

(1) Remove the four taptite bind B M4x12 screws.
(2) Release the two hooks at the bottom of the laser unit cover. Remove the laser unit cover
and the front cover from the machine by turning them to the direction of the arrow.
(3) Release the three hooks of the front cover to remove it from the laser unit cover.
Laser unit cover
Hook
Laser unit cover
Front cover
Fig. 2-19
Hook
Front cover
Hooks
Taptite bind B
M4x12
2-21
Taptite bind B
M4x12
Confidential