Customer Provides; Channel Selection - ADTRAN TRACER 4106 Plan A System Manual

TRACER 4106/4206 System Manual

Customer Provides

The following items are necessary for the installation of the TRACER 4106/4206 system and are not
provided by ADTRAN:
• 21 to 60 VDC power source (or AC adapter available from ADTRAN P/N 1280650L1), either polarity
referenced to ground
• Antenna and mounting hardware
• Antenna feedline cable
• Lightning arrestors
• Weatherproofing kits for antenna installation
4.

CHANNEL SELECTION

The FCC has allocated 83.5 MHz of spectrum in the 2.4 GHz band where the TRACER 4106 operates, and
125 MHz of spectrum in the 5.8 GHz band where the TRACER 4206 operates. Figure 1 and Figure 2
illustrate the bandwidth division.
2400 MHz 2416
Bandplan 1
Bandplan 1
5725 MHz 5734
612804206L2-1A
Channel A
2422 2428
Bandplan 3
Bandplan 2
Figure 1. 2.4 GHz Bandwidth Division (TRACER 4106)
Channel A
Bandplan 2 Bandplan 3
5744 5753
Figure 2. 5.8 GHz Bandwidth Division (TRACER 4206)
© 2004 ADTRAN, Inc.
Section 4 Network Turnup Procedure
Channel B
2441.75 2456 2462
Bandplan 1
Bandplan 2
Channel B
Bandplan 1 Bandplan 2
5787 5814 5824
2468 2483.5 MHz
Bandplan 3
Bandplan 3
5833 5850 MHz
37