Page 1
6PDUW H 6KHOI 8VHU 0DQXDO 4202023L5 Smart 16e, 2nd, AC Version 4202023L6 Smart 16e, 2nd, Dual AC Version 4202023L7 Smart 16e, 2nd, DC Version 4202023L8 Smart 16e, 2nd, Dual DC Version /$ )HEUXDU\ ...
Page 3
The following conventions are used in this manual. Notes provide additional useful information. Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life.
IMPORTANT SAFETY INFORMATION When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: Do not use this product near water, such as near a bath tub, wash bowl, kitchen sink, laun- dry tub, in a wet basement, or near a swimming pool.
Page 5
Affidavit Requirements for Connection to Digital Services • An affidavit is required to be given to the telephone company whenever digital terminal equipment without encoded analog content and billing protection is used to transmit digi- tal signals containing encoded analog content which are intended for eventual conversion into voice band analog signal and transmitted on the network.
Page 6
Affidavit for Connection of Customer Premises Equipment to 1.544 MBPS and/or Subrate Digital Services For the work to be performed in the certified territory of ______________ (telco name) State of ________________________________ County of ______________________________ I, _______________________ (name), ____________________ (business address), _____________________ (telephone number) being duly sworn, state: I have the responsibility for the operation and maintenance of the terminal equipment to be connected to 1.544 Mbps and/or __________________ subrate digital services.
Page 7
( ) C. An independent training course (e.g., trade school or technical institution) recognized by the manufacturer/grantee of the equipment used to encode analog signals; or ( ) D. In lieu of the proceeding training requirements, the operator(s)/maintainer(S) is (are) under the control of a supervisor trained in accordance with _______________ (circle one) above.
Page 8
FCC regulations require that the following information be provided in this manual: This equipment complies with Part 68 of the FCC rules. There is a label on the equipment that shows the FCC registration number and Ringer Equivalence Number (REN) for this equipment, if applicable.
Page 9
If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. If the equipment is causing harm to the network, the telephone company may request this equipment to be disconnected from the network until the prob- lem is resolved or it is certain that the equipment is not malfunctioning.
Page 10
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi- ronment.
Page 11
Industry Canada Compliance Information Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the “IC:” in front of the certification/registration number) signifies that the Industry Canada technical specifications were met. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the documentation or on the product labeling/markings.
Page 12
/,0,7(' 352'8&7 :$55$17< ADTRAN warrants that for five (5) years from the date of shipment to Customer, all products manufactured by ADTRAN will be free from defects in materials and workmanship. ADT- RAN also warrants that products will conform to the applicable specifications and drawings for such products, as contained in the Product Manual or in ADTRAN's internal specifications and drawings for such products (which may or may not be reflected in the Product Manual).
Page 13
Customer Service, Product Support Information, and Training ADTRAN will repair and return this product if within five years from the date of shipment the product does not meet its published specification or the product fails while in service. A return material authorization (RMA) is required prior to returning equipment to ADTRAN.
Page 14
Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN Support web site provides a variety of support services such as a search- able knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools.
Page 32
SMART 16e 8-pin modular jack POWER I/F used for Ethernet 10BaseT connection 10 BASE T 25-pin EIA-232 connector interface for asynchronous ASCII terminal VT100 (local and remote configuration) 6-pin modular jacks for daisy-chaining shelves together (use straight through cable) Removable terminal strip for external alarm circuits or other devices ALARM Fuse for left power supply...
Page 33
SMART 16e DUAL AC 8-pin modular jack POWER I/F used for Ethernet 10BaseT connection 10 BASE T 25-pin EIA-232 connector interface for asynchronous ASCII terminal VT100 (local and remote configuration) 6-pin modular jacks for daisy-chaining shelves together (use straight through cable) Removable terminal strip for external alarm circuits or other devices ALARM...
Page 34
SMART 16e 8-pin modular jack POWER I/F used for Ethernet 10BaseT connection 10 BASE T 25-pin EIA-232 connector interface for asynchronous ASCII terminal VT100 (local and remote configuration) 6-pin modular jacks for daisy-chaining shelves together (use straight through cable) Removable terminal strip for external alarm circuits or other devices ALARM Fuse for left power supply...
Page 35
SMART 16e DUAL DC 8-pin modular jack POWER I/F used for Ethernet 10BaseT connection 10 BASE T 25-pin EIA-232 connector interface for asynchronous ASCII terminal VT100 (local and remote configuration) 6-pin modular jacks for daisy-chaining shelves together (use straight through cable) Removable terminal strip for external alarm circuits or other devices ALARM...
Page 58
SMART 16e Displays assigned shelf number. SHELF CONTROLLER Also displays error messages (see Table 3-3). SHELF NUMBER ALARM Alarm LEDs. See Table 3-4 for conditions and solutions. 6-pin modular jack used for DATAMATE connection. LOCAL CONTROL )LJXUH &RQWUROOHU &DUG )URQW 3DQHO 6PDUW H 6KHOI 8VHU 0DQXDO /...
Page 69
$SSHQGL[ $ 3LQRXWV 5- /LQH 3LQRXW 7KH SLQRXW IRU WKH 5- /LQH LV VKRZQ EHORZ 7DEOH $ 5- /LQH 3LQRXW 1DPH 'HVFULSWLRQ Transmit Data from DSU to Network-Ring 1 Transmit Data from DSU to Network-Tip 1 Not Used Receive Data from Network to DSU-Tip Receive Data from Network to DSU-Ring 5- /LQH 3LQRXW...
Need help?
Do you have a question about the 4202023L5 and is the answer not in the manual?
Questions and answers