Possible Malfunctions - Bartscher Slim-Line 80L Instruction Manual

7. Possible Malfunctions

Problem
Device not
cooling
Device is not
providing
enough cooling
power
The device is too
loud
The compressor
does not turn on
automatically
The above described problem cases are given for orientation and as examples.
Should these or similar problems occur, please turn off the machine immediately
and don´t use it anymore. In order to check and repair your machine, please contact
a qualified expert or the manufacturer immediately.
- 30 -
Cause
• Plug not in socket.
• Damaged fuse.
• Power outage.
• Direct sunlight or heat
source nearby.
• Poor air circulation around
device.
• Door not closed fully or left
open for too long.
• Seals around door damaged
or deformed.
• Space between bottles and
cans is too small, or there
are too many bottles and
cans in the device.
• The device is not on a level
surface.
• The device is touching a wall
or other objects.
• The device is overfilled.
• The door has been left open
too long.
Solution
• Insert the plug into the
socket.
• Check the power supply.
• Check the power supply.
• Move the device away from
heat sources.
• Ensure proper distance from
walls and/or other objects.
• Close door fully, keep door
open for as short a time as
possible.
• Contact a sales agent.
• Ensure sufficient space
between bottles and cans in
the device, remove
unneeded objects.
• Place the device on a level
surface.
• Ensure sufficient distance
between the device and
walls or other objects.
• Remove unneeded objects.
• Keep door open for as short
a time as possible.