Cleaning And Maintenance; Safety Advice - Bartscher Slim-Line 80L Instruction Manual

Manual defrost
If cooling power decreases, manual defrost must be performed. To begin manual defrost,
press „ " and hold for 6 seconds. The LED control light „
NOTE!
To change other settings or parameters, information on doing so is contained in
the attached documentation of temperature control. Such changes can also be
performed by a qualified technician.
Tips for the user
•
To reduce loss of cold, keep the door open for as short of a time as possible. The
door should also not be opened more often than is necessary.
•
Do not block the display fridge's air ducts. Air circulation is necessary for the device
to function properly.
•
Beverages stored in the display fridge must be kept an appropriate distance apart from
other beverages. If stored too closely together, they will not cool as effectively.
•
Regularly empty the drip tray. It is located at the front of the device, under the glass
door.
•
Do not open the door during a sudden power outage, to avoid loss of cold.
•
After an interruption in the power supply or after removing the plug from its socket,
do not connect the Mini display fridge to a power source for at least 5 minutes.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
- 28 -
" will come on.