Charging The Device; Pairing Your Smartphone With Your Device - Garmin DESCENT MK1 Owner's Manual

Charging the Device

To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions
The device is powered by a built-in lithium-ion battery that you can charge using a standard wall outlet or a USB
port on your computer.
1 Plug the USB end of the cable into an AC adapter or a computer USB port.
2 If necessary, plug the AC adapter into a standard wall outlet.
3 Pinch the sides of the charging cradle
4 With the contacts aligned, place the device into the cradle
place.
When you connect the device to a power source, the device turns on, and the battery charge level appears
on the screen.
5 Charge the device completely.

Pairing Your Smartphone with Your Device

To use the connected features of the Descent device, it must be paired directly through the Garmin Connect
app, instead of from the Bluetooth
1 From the app store on your smartphone, install and open the Garmin Connect app.
2 Bring your smartphone within 10 m (33 ft.) of your device.
3 Select LIGHT to turn on the device.
The first time you turn on the device, it is in pairing mode.
TIP: You can hold LIGHT, and select
4 Select an option to add your device to your Garmin Connect account:
• If this is the first time you are pairing a device with the Garmin Connect app, follow the on-screen
instructions.
• If you already paired another device with the Garmin Connect app, from the
Garmin Devices > Add Device, and follow the on-screen instructions.
Introduction
NOTICE
to open the arms on the cradle.
settings on your smartphone.
®
to manually enter pairing mode.
(Device Care, page 87).
and release the arms to hold the device in
™
or menu, select
3