Customizing The Hot Keys; Changing The Units Of Measure; Viewing Device Information; Viewing E-Label Regulatory And Compliance Information - Garmin DESCENT MK1 Owner's Manual

Customizing the Hot Keys

You can customize the hold function of individual keys and combinations of keys.
1 Hold MENU.
2 Select Settings > System > Hot Keys.
3 Select a key or combination of keys to customize.
4 Select a function.

Changing the Units of Measure

You can customize units of measure for distance, pace and speed, elevation, weight, height, and temperature.
1 Hold MENU.
2 Select Settings > System > Units.
3 Select a measurement type.
4 Select a unit of measure.

Viewing Device Information

You can view device information, such as the unit ID, software version, regulatory information, and license
agreement.
1 Hold MENU.
2 Select Settings > About.

Viewing E-label Regulatory and Compliance Information

The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information.
1 Hold MENU.
2 From the settings menu, select About.
Your device can be used with wireless ANT+ or Bluetooth sensors. For more information about compatibility
and purchasing optional sensors, go to buy.garmin.com.

Pairing Your Wireless Sensors

The first time you connect a wireless sensor to your device using ANT+ or Bluetooth technology, you must pair
the device and sensor. After they are paired, the device connects to the sensor automatically when you start an
activity and the sensor is active and within range.
1 If you are pairing a heart rate monitor, put on the heart rate monitor
page 38).
The heart rate monitor does not send or receive data until you put it on.
2 Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other wireless sensors while pairing.
3 Hold MENU.
4 Select Settings > Sensors & Accessories > Add New.
5 Select an option:
• Select Search All.
• Select your sensor type.
After the sensor is paired with your device, the sensor status changes from Searching to Connected. Sensor
data appears in the data screen loop or a custom data field.

Wireless Sensors

Wireless Sensors
(Putting On the Heart Rate Monitor,
83